Sonatest SiteScan 150S Digital Ultrasonic Flaw Detector 150 S

Description

ebay template
The Following Items Are Included:
Sonatest Sitescan 150S Ultrasonic Flaw Detector (BC# 26601-L/T*)
(2) BNC Cables
AC Adapter/Charger
RS232 PC Interface Cable
Carrying Case
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Sonatest Sitescan 150S Ultrasonic Flaw Detector
Based on the 123W the 150S has the same broadband amplifier enhanced with all the software features required to improve operator efficiency and accuracy. These includes standard sizing tools, advanced measurement modes, full screen waveform display, thickness reading memory and an automatic calibration feature
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 90 Day Exchange Warranty
Sonatest Sitescan 150S Ultrasonic Flaw Detector
Setting standards of performance and reliability
For over 20 years the Sitescan name has meant highly reliable, technician focussed flaw detectors and the new range continues this tradition. From the 123W entry level model to the high specification 250S - ease of use, rugged construction and high quality amplifiers are key elements of the design. Typical applications are weld inspection, corrosion testing, small castings/forgings and lamination checking.
Advanced Defect Sizing Tools as Standard
Weld and pipe inspection are major applications for the Sitescan series and we have therefore equipped them with the latest software tools for defect sizing. The 123W has DAC, while the 150S and 250S have DAC, AVG, AWS and API sizing techniques. The use of integrated sizing software reduces analysis time and hence speeds inspection.
Multiple standard sizing techniques are essential for service companies working to different customer standards, especially as service work becomes more international and operators are required to work to different codes.
High Visibility Display
For any flaw detector the display is a crucial element. The Sitescan has a colour transflective TFT display as standard, providing high visibility at any light level. The choice of colours for menus and waveform display enhance clarity, with the LCD simulation mode giving direct sunlight readability. The TFT does not suffer the typical black out problems or temperature limitations of LCD giving full weather capability. The new Full Screen mode maximizes the A-scan area to improve readability further whilst testing and its fast response and peak capture functionality ensure any indication is clearly displayed, even if it only appears for one cycle of the PRF.
High Performance with Total Control
The Sitescan delivers high performance and advanced features, yet our engineer's experience in user interface design has ensured it is easy and quick to use. The acknowledged ease of use of previous generation Sitescans has been enhanced with the menu navigation key, providing easy access to functions. The menu structure has been designed to guide the user through their task with operation quickly becoming second nature.
Robust and Reliable
Sonatest's reputation for robust design and proven reliability is an important aspect of flaw detector ownership. Down time is expensive and should be minimized to ensure maximum productivity. The Sitescan series is constructed to high standards using Xenoy plastics and sealed to IP67, giving excellent water resistance so it can withstand the tough environments in which operators work.
Models in The Range
Based on the 123W the 150S has the same broadband amplifier enhanced with all the software features required to improve operator efficiency and accuracy. These includes standard sizing tools, advanced measurement modes, full screen waveform display, thickness reading memory and an automatic calibration feature.
Features
:
Colour Reference Feature
An A-scan from a known defect free component can be stored and recalled in a different colour to the live A-scan. This effectively means that defects are highlighted in a different colour to the natural reflectors, enabling quicker and more reliable defect detection.
Flexible Measurement
Two independent bar monitor gates offer a range of measurement options for signal height or distance using either flank or peak triggering. The echo-to-echo mode gives through paint thickness readings while the G1-G2 mode allows accurate gate positioning for signals which are extremely close together. The TRIG function gives surface distance and depth when using angle beam transducers.
Curve Surface Correction
When using angle beam transducers on a curved surface the Sitescan will calculate the surface distance and depth of defect, taking into account the internal or external radius.
Flaw Sizing
Automatic flaw sizing using DGS/AVG, AWS D1.1, API 5UE, speeds reporting of defect acceptance or rejection.
Help Facility
Full instructions for all functions are clearly displayed. A very useful function for multi-disciplined technicians who use a variety of NDT techniques and do not use the Sitescan on a day-to-day basis.
Full Screen A-scan
In full screen mode the A-scan fills the display improving visibility.
Fast Set Up Screen
The split screen mode enables fast set up and overview of basic parameters.
Specifications:
Test Range
0-5mm (0.2in) up to 0-10000 (400in) at steel velocity. Variable in sequence, 10mm or 1mm
Velocity
1000 - 9999 m/s
Probe Zero
0 - 999.999 us
Delay
0 - 10000m at steel velocity in 0.05 steps (0 - 400 in 0.002 in steps)
Gain
0 - 110dB in 0.5, 1, 2, 6, 10, 14, 20 dB steps
Test Modes
Pulse echo and transmit-receive
Gates
Start & width adjustable over full range Amplitude 0-100%, 0.5% steps Visual & audible alarms
Two gates Positive and negative triggering Gate 2 has selectable 0.6 second delay on alarm
Measurement Modes
Depth
Depth and amplitude of signal in gate
Echo - Echo
Echo - Echo distance, automatic gate 2 position
Trig
Trigonometric display of beam path, depth and surface distance Calculation of skip depth and curve surface compensation, X-offset for transducer
T-Min
Holds minimum thickness in depth mode
Pulser Voltage
-200 volt peak amplitude, rise/fall time <10ns into 50 ohm
Pulser Width
Fixed 100ns 30 - 250 ns linked to filter band
Pulser Repetition Frequency
Selectable 5 - 1000Hz.
Display
Colour transflective TFT Display area 111.4 x 83.5mm (4.39 x 3.29 in) A-scan area 315 x 200 max Variable brightness Sunlight viewable
8 Selectable colour schemes for A-scan & menu
Screen Update Rate
50 or 60Hz
Rectification
Full Wave, positive, negative, RF
Frequency Bands
Broadband 1 - 10 Mhz (-6dB)
Vertical Linearity
1% full screen height
Amplifier Linearity
+- 0.1 dB
Horizontal Linearity
0.33% full screen width
Reject
50% Suppressive LED warning light when activated
Waveform Smoothing
Produces a smooth signal envelope
Units
mm, inches or time
AGC
Automatic Gain Control sets selected echo to a user defined level (10-90%)
DAC
Up to 10 points may be entered and used to digitally draw a DAC curve Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes
AWS
Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code
API
Automatic defect sizing in accordance with API 5UE
AVG/DGS
Automatic defect sizing using probe data
A-scan Memory
800 waveforms
Panel Memory
100 stores for calibration setting
Thickness Logging
8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets Transferable to Excel using optional SDMS
Auto-Cal
Automatic calibration with two echoes
Reference Waveform
Recalled waveform can be shown in a different colour to live waveform for direct comparison
Display Freeze
Holds current waveform on screen
Peak Memory
For echo-dynamic pattern capture
Front USB
For connection to PC, keyboard and printer
Outputs
Serial Interface, composite video (PAL & NTSC), analogue output for amplitude and distance updated at PRF rate Transmitter sync output
Battery
Lithium Ion 14.4V 5.0 ampere hours Up to 16 hours, indication of battery charge. Recharge time 4 hours. Mains pack option
Charger
100 - 240 VAC, 50-60Hz
Environmental
Meets IP67
Temperature Range
Operating -10o C to 55o C (14o F - 131o F) Storage -40o C to 75o C (-40o F to 167o F)
Size
256 x 145 x 145mm (10 x 5.7 x 5.7 in.)
Weight
2.5Kg (5.5 lbs) with battery
For full Sonatest Sitescan 150S product specifications, please click here:
Sonatest Sitescan 150S
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management